P1382 - 4 Hole 90° Fitting, Left Hand

0
0 review(s) | Add your review

Standard Dimensions:

  • Hole Diameter: 9/16" (14mm)
  • Hole Spacing (From End): 13/16" (21mm)
  • Hole Spacing (On Center): 1-7/8" (48mm)
  • Width: 1-5/8" (41mm)
  • Thickness: 1/4" (6mm)

Material:

  • Fittings, unless noted, are made from hot-rolled, pickled and oiled steel plates, strip or coil, and conform to ASTM specifications A575, A576, A635, or A36. The fitting steel also meets the physical requirements of ASTM A1011 SS GR 33. The pickling of the steel produces a smooth surface free from scale.

    Many fittings are also available in stainless steel, aluminum and fiberglass. Consult factory for ordering information.

Application:

  • All parts drawings illustrate only one application of each fitting. In most cases many other applications are possible. The channels shown in the illustrations are P1000, 1-5/8" square, except where noted otherwise.
  • All 9/16" diameter holes use 1/2" x 15/16" hex head cap screws and 1/2" nuts - P1010, P4010 or P5510 - depending on the channel used. Nuts and bolts are not included with the fitting and must be ordered separately.

Dimensions:

  • Imperial dimensions are illustrated in inches. Unless noted, all metric dimensions are shown in millimeters.

More than 200 pages to explore

Unistrut metal framing channel, fasteners and hardware are the materials of choice for OEMs, contractors and plant maintenance personnel. Download the catalog to learn more.

1.jpg